Epoxy Resin Worktop
The worktop shall be monolithic, filled epoxy resin product and shall consist of a polymerized cast resin material formulated to provide a work surface with high chemical resistance characteristics. The combination of epoxy resin and asbestos free inert material shall be oven-cured in molds to obtain maximum physical strength and stability. It is available in thickness of 19mm and different color combination. Edges and corners furnished with flat, radius marine edges to prevent spillage of fluids. Worktops shall be provided with 100mm high backsplash ever shown in drawing same material and thickness as worktop. Applied backsplashes are to be joined to the top at the job site. Also these tops shall be highly resistant to normally used laboratory reagents.
Advantages
Worktop with very good level of chemical resistance, recommended for moisture and wet areas, high temperature load areas, areas with stress on chemical load. Not suitable for sulfuric acid, hydrofluoric acid, nitric acid, potassium permanganate, various solvents.
Nature
| Level of Chemical Resistance |
Very good |
| Critical substances |
Sulphuric acid, hydrofluoric acid, nitric acid, potassium permanganate, Various solvents |
| Mechanical resistance |
Fair, sensitive to scratches |
| Recommended for use |
Moisture or wet area, high temperature load areas, areas with stress on chemical load. |
| Not for use in |
Listed critical substances chemical applications |
| Critical temperature |
300 0C |
Phenolic Resin Worktop
Phenolic Resin counter tops are lightweight, hard, durable and highly chemical resistant. They are oil and moisture resistant and do not support the growth of most bacteria and fungus.
It provides us with continuous heat exposure up to 350°F (176°C). And is resistant to scuffs and abrasions. They are the preferred choice for environments where lab experiments are performed in a contaminated free environment. The worktop shall be with 16mm thick Trespa Top. Lab plus, a self supporting flat panel with a cellulose fiber reinforced Phenolic resin core. Each panel has an integrated decorative surface based on pigmented, electron beam cured resins which are resistant to the most aggressive chemicals and easy to clean and maintain.
Advantages
Worktop with good level of chemical resistance, recommended for moisture and wet areas, low class microbiology areas. Not suitable for hydrofluoric acid, nitric acid, sulfuric acid, sodium hydroxide.
Nature
| Level of Chemical Resistance |
Good |
| Critical substances |
Hydrofluoric acid, Nitric acid, sulphuric acid, sodium hydroxide |
| Mechanical resistance |
Limited with permanent damage |
| Recommended for use |
Moisture and wet area, low class microbiology areas |
| Not for use in |
High chemical load areas |
| Critical temperature |
135 0C |
Technical Ceramic Worktop
High-performance ceramics, also called technical ceramics, are a material that - in contrast to decorative ceramics - has been optimized for technical applications. It is characterized by special properties, mainly with regard to heat resistance, mechanical stability and dimensional stability .The worktops shall be made of first grade Acid resistant red colored ceramic tile of 145x145mm with raised rim, are bonded to 36mm thick plywood base and jointed chemically resistant cement.
Advantages
Worktop with excellent level of chemical resistance, recommended for moisture and wet areas, high temperature load areas, areas with stress on chemical load. Not suitable for hydrofluoric acid.
Nature
| Level of Chemical Resistance |
Excellent |
| Critical substances |
Hydrofluoric acid |
| Mechanical resistance |
Good |
| Recommended for use |
Moisture or wet area, high temperature load areas, areas with stress on chemical load. |
| Not for use in |
Hydrofluoric acid applications |
| Critical temperature |
800 0C |
Stainless Steel Worktop
The worktop made of 316 grade steel bonded on to wood core with suitable reinforcing on the underside they are available flat edge or raised edges. Solid stainless steel worktops are a unique product innovation, which fits perfectly to the current green sustainability and contemporary minimalism themes. There is no other material as extremely thin and practically indestructible as this. Moreover, it is 100% recyclable because no additional construction is glued to it.
Advantages
Worktop with fair level of chemical resistance, recommended for moisture and wet areas, high temperature load areas, areas with stress on decontamination, clean areas. Not suitable for mineral acids (hydrochloric, sulfuric, nitric, phosphoric, hydrofluoric), cadmium, lactic acid.
Nature
| Level of Chemical Resistance |
Fair |
| Critical substances |
Mineral acids (hydrochloric, sulphuric, nitric, phosphoric hydrofluoric), cadmium, lactic acid) |
| Mechanical resistance |
Good |
| Recommended for use |
Moisture or wet area, high temperature load areas, areas with stress on decontamination, clean area |
| Not for use in |
High chemical load areas |
| Critical temperature |
180 0C |
| Thickness available: |
1.5mm & 2mm |
| Color available |
#LP49702
|
Melamine Laminated Plywood
The worktop shall be made of water proof bonded furniture grade plywood of 24mm, 30mm, and 36 mm thickness and finished with high pressure melamine laminate of 0.9mm thickness on both sides. All edges shall be finished with 3mm thick PVC edging bonded by means of hot melt glue at 205degrees Celsius in the factory.
Advantages
Worktop with limited level of chemical resistance, recommended for desk worktops, mobile benches, instrument benches. Not suitable for most of aggressive acids, solvents, bases and oxidants.
Nature
| Level of Chemical Resistance |
Limited |
| Critical substances |
Most aggressive acids, solvents, bases and oxidants |
| Mechanical resistance |
Limited with permanent damage |
| Recommended for use |
Desk worktops, Mobile bench, Instruments benches |
| Not for use in |
Moisture and wet area, Clean areas |
| Critical temperature |
60 0C |
Solid Surface Worktop
Solid surface tops are used where the appearance with the properties of prime importance. It offers a seamless installation, which give scope for high degree of creativity. Acrylic sinks are used with practically no visibility of joint.
Advantages
- Longevity
- Ease of cleaning
- Invisible seams
- Integrated sinks
Nature
| Level of Chemical Resistance |
Limited |
| Critical substances |
Most aggressive acids, solvents, bases and oxidants |
| Mechanical resistance |
Limited with permanent damage |
| Recommended for use |
Moisture and wet area |
| Not for use in |
High chemical load areas |
| Critical temperature |
160 0C |
Epoxy Resin Sink
The sink shall be monolithic, filled epoxy resin product and shall consist of a polymerized cast resin material formulated to provide a high chemical resistance characteristic. The combination of epoxy resin and asbestos free inert material shall be oven-cured in molds to obtain maximum physical strength and stability. Epoxy resin sinks are the most popular laboratory sink material and are highly resistant to many acids; solvents and other inert chemicals found in both commercial and educational laboratory settings. Epoxy sinks are available in all of the same colors as epoxy tops. We offer a wide variety of both drop-in and under mount (requires a sink support system) sinks to fit most every need. Epoxy sinks are beneficial to the user because they are extremely durable. They provide the best all around answer for lab grade sinks as they will resist most acids, solvents, high and low pH solutions etc. If you consistently use nitric, hydrochloric, hydrofluoric, sulfuric acid and other highly corrosive compounds.
Technical Ceramic Sink
High-performance ceramics, also called technical ceramics, are a material that in contrast to decorative ceramics has been optimized for technical applications. It is characterized by special properties, mainly with regard to heat & chemical resistance, mechanical stability and dimensional stability. Raw materials such as clay, kaolin, quartz and feldspar, ceramic sinks are typically durable, easy to keep clean and reassuringly solid to look at too.
Polypropylene Sink
Polypropylene laboratory sinks, traps, and pipe fittings are available in a molded, one piece seamless construction of a blend of virgin polyolefin's, (polypropylene and polyethylene) with 3% carbon black ultra-violet stabilizer; these polypropylene products are designed for a non-pressurized gravity based-system leading to the safe discharge of corrosive fluids in a laboratory.
Advantages
- Manufactured of chemical resistant polyolefin's
- Corrosion Resistant against commonly used acids and chemicals
- Mechanical Strength
- Shock Resistance
- under counter mount
- Ease of Installation
- One piece molded with separate drain outlet
- Lower weight for reduced cost of materials and freight
Stainless Steel Sink
The sink made of 316 grade steel bonded on to wood core with suitable reinforcing on the underside they are available flat edge or raised edges. Solid stainless steel is a unique product innovation, which fits perfectly to the current green sustainability and contemporary minimalism themes. There is no other material as extremely thin and practically indestructible as this. Moreover, it is 100% recyclable because no additional construction is glued to it. A sink also known by other names including sinker, washbowl, hand basin and wash basin is a bowl-shaped plumbing fixture used for washing hands, dishwashing, and other purposes. Sinks have taps (faucets) that supply hot and cold water and may include a spray feature to be used for faster rinsing.
Solid Surface Sink
Solid surface is a non-porous low-maintenance material used for surfaces such as sink. It can mimic the appearance of granite, marble, stone, and other naturally occurring materials, and can be joined nearly invisibly by a trained craftsman.
Advantages
- Longevity
- Ease of cleaning
- Invisible seams
Disadvantages
- Gentle non-abrasive cleaning. An example is the use of microfiber cloths or sponges
- Do not cut or chop directly on the surface.
- Do not put hot pots directly on the surface. Avoid corrosive chemicals, highly acidic or alkaline solutions and dye or staining foods.
Grab Rail, Metal frames & Pedestrial box
Suite all purpose, In electro galvanized powder coated with option of different RAL colors. Our Grab Rail, Metal frames, Pedestrial box is finished in an easy to clean, chemically resistant polyester powder coating. Our pedestal boxes are epoxy powder coated steel mounted to the worktop & cabinet.
Under Bench Cabinets
Wooden Cabinet
Lab Plus offers a wide range of cabinetry to suit all purposes. Storage cabinets with adjustable shelves, drawer cabinets, sink cabinets, glassware cabinets, waste bin cabinets, open cabinets, and knee hole cabinets. The core materials of cabinetry are 18mm thick Water Boil Proof plywood with melamine lamination on both sides with 3mm thick PVC edging for door and drawer front and 0.45mm thick tape edging for carcass. Corrosion proof snap on self closing hinges opening up to 165 degrees adjustable in 4 directions. The cabinetry comes with plastic grab holds or Handles/ extruded aluminum grab rail powder coated to Client's choice of colors. The cabinetry also available in heavy duty castors.
Steel Cabinet
Lab Plus offers a wide range of cabinetry (Single wall /Double Wall Constructions) to suit all purposes, in electro galvanized powder coated steel with different RAL colors. The carcass/door/drawer front for single wall construction for different cabinetry modules will be with 18 gauge and the drawers,integrated with full extension drawer slides which opens completely and smoothly for easy access to the contents. The carcass/ door/ drawers front for double wall construction for a different cabinetry module will be 20 gauges with sound deadening materials and the drawers, integrated with full extension drawer slides which open completely and smoothly for easy access to the contents. Providing Institutional type, five knuckle projecting barrel hinges for doors. Fix two hinges for doors up to 36” high; three hinges for doors over 36” high. The hinges will drill on each leaf for three screw attachment to door and frame. The cabinetry also available in heavy duty castors.
Wall Cabinets
Lab Plus offers a wide range of wall cabinets with variety color options. Wall cabinets comes in Single door, double door, hinged glass doors and glass infill panel doors, sliding glass doors and open wall cabinets all with 1 or 2 adjustable shelves. These are available in various sizes to suit client's requirements.
Tall Storages
Lab Plus offers a wide range of tall storages such as, cabinet with panel doors, glass infill doors, sliding glass doors and hinged glass doors with wood & steel options to suite all purpose.
Wooden tall storage
The core materials of cabinetry are 18mm thick Water Boil Proof plywood with melamine lamination on both sides with 3mm thick PVC edging for door front and 0.45mm thick tape edging for carcass.Corrosion proof snap on self closing hinges opening up to 165 degrees adjustable in 4 directions. The cabinetry comes with plastic grab holds or Handles.
Steel tall storage
Lab Plus offers a wide range of tall storage cabinetry to suit all purposes, in electro galvanized powder coated steel with different RAL colors. The carcass/ door/drawer front for single wall construction for different cabinetry modules will be with 18 gauge and the drawers integrated with full extension drawer sliders which opens completely and smoothly for easy access to the contents. The carcass/ door/drawers front for double wall construction for different cabinetry module will be 20 gauge with sound deadening materials and the drawers integrated with full extension drawers slides which open completely and smoothly for easy access to the contents. Providing Institutional type, five knuckle projecting barrel hinges for doors. Fix two hinges for doors up to 36” high; three hinges for doors over 36” high. The hinges will drill on each leaf for three screw attachment to door and frame.
Service Fittings
Lab plus offers reputed service fittings made by the leading international manufacturers such as Broen,Water Saver, Toff, etc... The fittings conform to international standards for use in laboratories with approval from all the leading quality and safety institutions. While providing quality with performance, beauty and ease of operation, Lab Plus provides various options to fit the client’s requirements, application and budget. All the service fittings are available with various mounting options to suit the requirement.
Fittings available as follows:
- Bench Mounted
- Service mounted
- Dropdown type
Special fittings are available for schools, where extra care and more safety features are recommended.The services can be accessed at the workspace by using different channel systems. The system is selected to match the bench construction, type of services, space availability and required features,etc… All the service fittings are available with various mounting options to suit the requirements.
Service Modules
Service Columns
Service column can be used very flexibly. It can be mounted directly on the floor or workbench. As with the service cell, exchangeable cassettes are used.
Service Ceiling
The service ceiling has completely revolutionized and redefined the laboratory aesthetics by offering maximum flexibility and freedom of movement among all system without interface problem to people working in the laboratory. Service ceiling provides a versatile and functional way of combining electrical,
data/communication, and service outlets (gas, air, vacuum) into one system.
Service Island
Service Island / peninsular bench come with one front panel and one shelf. The service island is very flexible due to cassette system. These easily accessible cassettes on both sides are exchangeable and make for easy retrofitting.
Service Walls
Service walls are the most compact version of all service supply system; the entire laboratory wall can be replaced by them. Service panels & electrical modules can be individually equipped and upgraded.The powder coated panel made of mild steels. Steels are clipped into the lateral profile of the service from above the worktop without of tools. Custom designs and lengths available to meet your project specifications.
.JPG)
.JPG)
.JPG)
.JPG)
.jpg)
